Rexroth linear modules are precise, ready-to-mount guide systems that combine high-performance characteristics with compact dimensions. Rexroth provides a favorable price/performance ratio and fast delivery times.
Structural design
- Ready-to-install linear modules in any length up to Lmax
- Realization of greater lengths of up to 6000 mm
- Rigid aluminum profile frame with Rexroth ball rail system with cover strip
- Ball runner block with moderate preload (preload class C1)
- Aluminum carriages with T-grooves and centering holes
- Economical maintenance thanks to the central relubrication option (grease lubrication or oil lubrication) from both sides via the carriage
- High-performance toothed belt (AT profile) for high drive torques with simultaneously high rigidity
Attachments
- Planetary gearbox with various gear ratios
- Motor attachment kits according to customer specification
- Servomotor
- Magnetic field sensors for easy assembly
- Switch (proximity or mechanical) cable channel, socket-plug and extension cables in the accessories program
Attachments (range of accessory products)
- Clamping fixtures and sliding blocks
- Connecting shafts
- Connecting technology for linear motion systems
- Sensors and extension cables
Material pairing
ALST:
- Main body, carriage and end enclosures made of anodized aluminum (AL)
- MKR-065/-080/-110/-140/-145: ball rail and ball runner block made of rolling bearing steel (ST)
- MKR-040: Ball rail and ball runner block of rust and acid resistant material
- Grooved ball bearing of the drive mechanism (belt pulleys) made of rolling bearing steel
ALCR:
- Frame, carriage and end enclosures made of anodized aluminum (AL)
- MKR-065/-080/-110/-140/-145: Ball rail made of rolling bearing steel with corrosion resistant coating, matte-silver finish, hard chrome plated (Resist CR). ball runner block made of corrosion-resistant steel (Resist NR)
- MKR-040: Ball rail and ball runner block of rust and acid resistant material.
- Grooved ball bearing of the drive mechanism (belt pulleys) made of rolling bearing steel
LSS
lubrication versions: (Initial lubrication done at the factory)
- Initial standard greasing done at the factory, suitable for normal ambient conditions.
- Simple relubrication via manual grease gun.
- MKR-065/-080/-110/-140/-145: Grease lubricant Dynalub 510, NLGI grade 2 lithium-based high-performance grease according to DIN 51818 (KP2K-20 according to DIN 51825)
- MKR-040: Grease lubricant Dynalub 520, lithium-based high-performance grease of the NLGI grade 00 according to DIN 51818 (G00K-20 according to DIN 51826)
LPG: (Corrosion prevention, no initial lubrication)
- Linear module without initial greasing done at the factory.
- Ball rail system, only with corrosion prevention.
- Basic lubrication required
LCF: (prepared for connection to central lubrication systems with liquid grease)
- for liquid grease, NLGI grade 00 lithium-based high-performance grease according to DIN 51818 (GP00K-20 according to DIN 51826)
- Only use liquid grease lubrication with single-line total-loss lubrication systems via piston distributors.
- Basic lubrication required
LCO: (prepared for connection to central lubrication systems with oil)
- ball runner block with integrated non-return valves
- Only use oil lubrication with single-line total-loss lubrication systems via piston distributors.
- Basic lubrication required
Models
| 1) | Journal for motor attachment right or left |
| 2) | Journal for motor attachment on both sides |
| 3) | With gear reducer (motor mounting via clamping hub) |
Carriage variants
Carriage (TT) with T-grooves
Structure and attachments
Structural design
1 End head (drive side)
2 Ball rail systems
3 Toothed belt drive
4 Carriage
5 End head (clamping side)
6 Main body
Attachments:
7 Magnetic sensor
8 Cable channel
9 Switch bracket
10 Proximity switch
11 Mechanical switch
12 Socket/plug